Heat Exchangers
Equipments used for heating Air by using Steam Or Thermic Fluid as the heating medium. Finned tubes are used as the heat transferring media to the air.
The strip is tension wound into a machined groove over the base tube material. This ensures maximum heat transfer at high temperature.
Used for Air Cooling applications and for Moisture removal. These Heat Exchangers mainly have finned tubes with Aluminium fins. Material of construction changes based on the application
These Heat Exchangers are specially designed with specific material selection to handle high temperatures beyond
350 ° C.
These Heat Exchangers are used in Air Heating applications when using Liquid as heating medium Or for oil cooling applications.
We can fabricate different type of Shell and Tube Heat
Exchangers as per customer requirements and Drawing,
We also manufacture many kinds of pressed components, we have Power Presses of different capacity ranging from 10Tons – 100 Tons.
We have capacity to undertake any kind of fabrication job like Structures, Skids, Tanks etc weighing up to 20 Tons. We have specialized ourselves in fabrications of Tanks and Bulk Storage Vessels.
Finned Tubes
These types of fins are semi-crimped and wrapped under tension around the outside of the base tube. Fins are either tack welded or brazed to the base tube at each end of the tube.
The strip is tension wound into a machined groove over the base tube material. This ensures maximum heat transfer at high temperature.
The formation of ‘L’ base of the strip under tension gives optimum contact of the ‘L’ base on the base to improve the heat transfer efficiency.
These types of fins are semi-crimped and wrapped under tension around the outside of the base tube. Fins are either tack welded or brazed to the base tube at each end of the tube.
These types of fins are semi-crimped and wrapped under tension around the outside of the base tube. Fins are either tack welded or brazed to the base tube at each end of the tube.
These types of fins are semi-crimped and wrapped under tension around the outside of the base tube. Fins are either tack welded or brazed to the base tube at each end of the tube.