Continuous Spiral Crimped Fins

These types of fins are semi-crimped and wrapped under tension around the outside of the base tube. Fins are either tack welded or brazed to the base tube at each end of the tube. These finned tubes can be further HOT DIPPED GALVANISED for surface protection where as the deposition of Zinc also adds up to the efficiency of finned tubes.

Maximum Operating Temperature-250 0 C:

a) Base Tube Diameter : 5/8’’ to 3” (15.8 mm to 76.2 mm)
Tube Material
: Carbon Steel / Stainless Steel / Copper / Cupro-Nickel

b) Fin Material : Carbon Steel / Stainless Steel / Copper / Aluminium / Brass
Fin Height
: ¼’’ to ¾’’ (6.4 mm to 20 mm)
Fin Pitch : 3fins/inch to 11 fins/ inch (118 fins/meter to 433 fins/meter)

Application
Commercial Application for Air Heating OR Air Cooling up to 1300 C to 1500 C using Steam / Thermic Fluid / Hot Water as Heating Media OR Water as Cooling Media
Send Enquiry



| Steam Thermic Fluid Heated Air Heaters | Heat Exchangers For Heat Recovery | Multiple Cell Heat Exchangers | Heat Exchangers With ‘U’ Tube Construction | Air Coolers Or Condensers | Shell & Tube Type Heat Exchangers | Sheet Metal / Pressed Component | Fabrications of Tanks and Storage Vessels | Continuous Spiral Crimped Fins | Square / Rectangular Fins | Continuous Spiral G Type Fins | Wire Wound Finned Tubes | Continuous Spiral L Type Fins | Continuous Spiral Crimped Fins |

CONTACT

Address : Plot No. R -71, TTC Industrial Area, MIDC, Rabale, Navi Mumbai - 400 701 Maharashtra, India. * Tel : +91 22 27603136 * Fax : +91 22 27603893 * Mobile : +91 98218 76052 * Email : response@thermotech-finnedtubes.com