Wire Wound Finned Tubes

These finned tubes have fins made of wire instead of strips. Continuous loops of wire are formed and are continuously soldered to the circumference of the tube to ensure 100% contact. Loops per turn and turns per foot can be altered as per surface area requirements. Due to continuous soldering of wire loops these finned tubes offer a very high heat transfer efficiency with less air pressure drop.

Maximum Operating Temperature-175 °C:

a)Tube Diameter : 5/8’’ to 1” (15.8 mm to 25.4 mm)
Tube Material : Carbon Steel / Stainless Steel / Copper

b) Tube Size : 5/8” – ¾” (15.87mm – 19.05mm)
Wire Material :
GI Wire / Stainless Steel Wire / Copper Wire
Wire Thk. : 0.7mm
Loops per Turn : 58 – 90 Nos. per turn.
Turns per foot : 36 – 66 Turns per foot.

Application
Used in air cooled Oil Coolers in thermo Pac units and also used for Air Heating applications

Send Enquiry



| Steam Thermic Fluid Heated Air Heaters | Heat Exchangers For Heat Recovery | Multiple Cell Heat Exchangers | Heat Exchangers With ‘U’ Tube Construction | Air Coolers Or Condensers | Shell & Tube Type Heat Exchangers | Sheet Metal / Pressed Component | Fabrications of Tanks and Storage Vessels | Continuous Spiral Crimped Fins | Square / Rectangular Fins | Continuous Spiral G Type Fins | Wire Wound Finned Tubes | Continuous Spiral L Type Fins | Continuous Spiral Crimped Fins |

CONTACT

Address : Plot No. R -71, TTC Industrial Area, MIDC, Rabale, Navi Mumbai - 400 701 Maharashtra, India. * Tel : +91 22 27603136 * Fax : +91 22 27603893 * Mobile : +91 98218 76052 * Email : response@thermotech-finnedtubes.com